AGV Charging Pile

Product Introduction：

   AGV charging pile: When the AGV vehicle need the charging，it will send automatically out the request signal. The ground control center will conduct the vehicle to the regulated charging pile. The connector of the vehicle will connect automatically to the ground charging system. When finishing charging, the vehicle will be separated from the charging system and run to the work zone or standby zone.

Product Features：

•    Monitor the real-time change of the battery. Shut off the power when any abnormal situation happens.

•    High power battery，Quick charging

•    The performance of the charging piles are controlled by the server. The charging modes of the charging piles are automatic charging and manual charging.

•    Friendly Interface: LCD Interface can show clearly the output voltage, output current, work condition and alarm info etc.

•    Good self protection function: Limited output current protection, output short-circuit protection, battery polarity reverse protection,reverse charging protection, communication interrupt protection,overheating protection, abnormal situation alarm protection.

•    The output connector can be controlled. When non charging, the connector is in the status of power-off.

Technical Parameters：

•    Dimension（L*W*H）（mm）：600*350*775

•    Self Weight（kg）：60

•    Input Voltage（V）：220±10%

•    Output Voltage（V）：30-58V（直流）

•    Output Current（A）：48-50

•    Work Temperature（℃）：0-50

•    Work Humidity（%）：20-80

•    Altitude（KM）：≤2

Charging Modes：

•    When available，the AVG voltage is smaller than the setting threshold value and the charging begins.  

•    Automatic charging of low voltage